| Moc | 10kv ~ 550kv |
|---|---|
| Projektuj obciążenie w kg | 300 ~ 1000 kg aplikowane do 50 cm od góry |
| Grubość | 1 mm do 30 mm |
| Obróbka powierzchni | cynkowanie ogniowe |
| Garnitur dla | dystrybucja energii elektrycznej |
| materiał | Q235 Q345 GR65 SS400 |
|---|---|
| Prędkość wiatru | 35 m / s |
| Pochodzenia, miejsca | Yixing |
| typu | Pogrzeb |
| nawierzchnia powierzchniowa | cynkowanie ogniowe |
| Moc | 10kV |
|---|---|
| Prędkość wiatru | 160KM/H |
| Grubość | 4mm |
| Standard spawania | AWS D1.1 |
| Tolerancja | +/-2% |
| Władza | 10kv ~ 550kv |
|---|---|
| Prędkość wiatru | 160km/h, 30m/s |
| Gęstość | 1mm do 30mm |
| Norma spawalnicza | AWS D1.1 |
| Tolerancja | +/-2% |
| Transmisson Line | 138kv |
|---|---|
| Design Load in Kg | 300~ 1000 Kg appliced to 50cm from the to pole |
| Minimum yield strength | 460 mpa |
| Pole Shape | Conical |
| Appearance | Tubular,triangular,angular,lattice |
| Height | 10M |
|---|---|
| Pole Shape | 12 sides |
| Minimum yield strength | 345 mpa,or 460mpa |
| Load | 2.5KN or more |
| Appearance | Tubular,triangular,angular,lattice |
| Height | 13M |
|---|---|
| Voltage | 230kv |
| Minimum yield strength | 345 mpa,or 460mpa |
| Load | 6.5KN or more |
| Appearance | Tubular,triangular,angular,lattice |
| Height | 14M |
|---|---|
| Voltage | 110KV |
| Minimum yield strength | 345 mpa or 460mpa |
| Load | 5KN or 2.5KN |
| Appearance | Tubular,triangular,angular,lattice |
| Power | 10kv~550kv |
|---|---|
| Type | straight pole, tensile pole, turn pole |
| Thickness | 1mm to 30mm |
| Wind speed | 160km/h, 30m/s |
| tolerance | +/-2% |
| Power | 10kv~550kv |
|---|---|
| Type | straight pole, tensile pole, turn pole |
| Thickness | 1mm to 30mm |
| Wind speed | 160km/h, 30m/s |
| tolerance | +/-2% |
