| Height | 8M |
|---|---|
| Usage | sub stational distribution line |
| Minimum yield strength | 345 mpa |
| Standard | Pakistan Standard |
| Appearance | Tubular,triangular,angular,lattice |
| Power | 69KV |
|---|---|
| Torlance of dimenstion | +-2% |
| Thickness | 1mm to 30mm |
| Surface treatment | hot dip galvanization |
| Suit for | electricity distribution |
| Power | High Voltage |
|---|---|
| Torlance of dimenstion | +-2% |
| Thickness | 1mm to 30mm |
| Surface treatment | hot dip galvanization |
| Suit for | electricity distribution |
| Power | 10kv~550kv |
|---|---|
| Type | straight pole, tensile pole, turn pole |
| Thickness | 1mm to 30mm |
| Wind speed | 160km/h, 30m/s |
| tolerance | +/-2% |
| Power | 10kv~550kv |
|---|---|
| Design load in kg | 300~1000kg applicated to 50cm from the top |
| Thickness | 1mm to 30mm |
| Surface treatment | hot dip galvanization |
| Suit for | electricity distribution |
| Power | 10kv~550kv |
|---|---|
| Type | straight pole, tensile pole, turn pole |
| Thickness | 1mm to 30mm |
| Wind speed | 160km/h, 30m/s |
| tolerance | +/-2% |
| Moc | 10kv ~ 550kv |
|---|---|
| typu | prosty biegun, tyczka na rozciąganie, biegun obrotu |
| Grubość | 1 mm do 30 mm |
| Prędkość wiatru | 160 km / h, 30 m / s |
| Tolerancja | / -2% |
| Moc | 10kv ~ 550kv |
|---|---|
| typu | prosty biegun, drążek do rozciągania, drążek skrętu |
| Grubość | 1 mm do 30 mm |
| Prędkość wiatru | 160 km / h, 30 m / s |
| Tolerancja | / -2% |
| Garnitur dla | Dystrybucja energii elektrycznej |
|---|---|
| kształt | conoid, multi-pyramidal, columniform, polygonal lub conical |
| Moc | 10kv ~ 550kv |
| Prędkość wiatru | 160 km / h, 30 m / s |
| Tolerancja | / -2% |
| Moc | 10kv ~ 550kv |
|---|---|
| Projektuj obciążenie w kg | 300 ~ 1000 kg aplikowane do 50 cm od góry |
| Grubość | 1 mm do 30 mm |
| Obróbka powierzchni | cynkowanie ogniowe |
| Garnitur dla | dystrybucja energii elektrycznej |
