| typu | prosty biegun, drążek do rozciągania, drążek skrętu |
|---|---|
| Garnitur dla | dystrybucja energii elektrycznej |
| kształt | conoid, multi-pyramidal, columniform, polygonal lub conical |
| Standard spawania | AWS D1.1 |
| Tolerancja | / -2% |
| Grubość | 1 mm do 30 mm |
|---|---|
| kształt | Conoid, Multi-pyramidal, Columniform, polygonal lub conical |
| Moc | 10kv ~ 550kv |
| Garnitur dla | dystrybucja energii elektrycznej |
| Prędkość wiatru | 160 km / h, 30 m / s |
| typu | AWS D1.1 33kv linia przesyłowa ocynkowane słupy energii elektrycznej |
|---|---|
| Pozew o | dystrybucja energii elektrycznej |
| Obróbka powierzchni | ocynkowane ogniowo |
| materiał | Można dostosować |
| Do spawania | AWS D 1.1 |
| Materiał | Q345, Q235 |
|---|---|
| Obciążenie projektowe w kg | 300 ~ 1000 kg przykładane do 50 cm od słupka |
| Torlance wymiaru | +- 2% |
| Garnitur dla | dystrybucja energii elektrycznej |
| Norma spawalnicza | AWS D 1.1 |
| Type | straight pole, tensile pole, turn pole |
|---|---|
| Surface Treatment | hot dip galvanized |
| Design Load in kg | 300~1000kg applicated to 50cm from the top pole |
| Wind speed | 160km/h, 30m/s |
| Suit for | electricity distribution |
| Power | 10kv~550kv |
|---|---|
| Design load in kg | 300~1000kg applicated to 50cm from the top |
| Thickness | 1mm to 30mm |
| Surface treatment | hot dip galvanization |
| Suit for | electricity distribution |
| Design load in kg | 300~1000kg applicated to 50cm from the top pole |
|---|---|
| Surface treatment | hot dip galvanization |
| Power | 10kv~550kv |
| Torlance of dimenstion | +- 2% |
| Suit for | electricity distribution |
| Suit for | electricity distribution |
|---|---|
| Type | straight pole, tensile pole, turn pole |
| Power | 10kv~550kv |
| Wind speed | 160km/h, 30m/s |
| tolerance | +/-2% |
| Features | high resistance of shock or vibration |
|---|---|
| Material | minimum yield strength is 345Mpa |
| Wind speed | 160km/h, 30m/s |
| Voltage | according to the customer's request |
| Warranty | 30 years |
| Power | 10kv~550kv |
|---|---|
| Wind speed | 160km/h, 30m/s |
| Thickness | 1mm to 30mm |
| Welding standard | AWS D1.1 |
| tolerance | +/-2% |
